The VQ series of low friction cylinders with last metalGeneration incorporates one Space sealing structurey Guide bushings with ball bearings, which effectively exceeds the limitations of conventional low friction cylinders. They include:
- Compact cylinder of low friction VQQ series
- Low friction cylinder resistant to radial loads VQM series
- Low friction cylinder (simple effect) VQP series
These low friction cylinders are widely used in industries such as semiconductor manufacturing, ceramics, Glass processingand machining and rectifiedof mechanical components.

1. Compact cylinder of low friction VQQ series
Compact low friction cylinders designed for low pressure applications, low speed, uniform speed or low friction.
Working principle: The structure of Fluororresin sealand of the space seal are combined with a ball guide bushing to achieve low friction (sliding resistance is only 0.05 n) and a thin design.
Features:
- Ultradelgado and compact: 30 % thinner than traditional cylinders, ideal for small spaces.
- Stable low speed operation: Without effect of 0.3 mm/s slippage, while high -speed versions admit up to 3000 mm/s.
- Precision force control: force fluctuation by below 0.05 N, suitable for force -sensitive delicate operations.
- High speed and high frequency response: Reach up to 50 cycles per second in short race applications.
2. Low friction cylinder resistant to radial loads VQM series
Designed for low pressure action, low speed, uniform speed, high pressure, low friction, High speedy high frequency.
Working principle: This series uses an integrated ball -ball design and bushings Ball bearing guide, taking advantage of the space sealing technologyto reduce sliding resistance and at the same time improve lateral load capacity.
Features:
- Side load resistance: Integrated ball bearings support high lateral forces, which makes them appropriate for Non -ideal assembly conditions.
- Low friction performance: Sliding resistance is just 0,005 MPaand admits speeds of 0,3 mm/s (ultrabaja)a 1000 mm/s (high speed performance).
- Prolonged service life: With classification for 10 000 kmoperation or 100 millionof alternative cycles.
- High stability: constant friction over time, maintaining the accuracy of the control of strength within 0.05 N.
- Oil -free design: reduces maintenance costs and meets Clean room requirements.


3. Cilindro de baja fricción (efecto simple) serie VQP
Cilindro de baja fricción adecuado para baja fricción y control de fuerza.
Working principle: Utiliza una estructura sin pistón (vástago hueco) y tecnología de sellado de espacios, lo que permite una contracción de efecto simplemediante el control de fuerza externa. La resistencia al deslizamiento es extremadamente bajay no cambiacon el tiempo.
Features:
- Sin cabeceo: mantiene un movimiento suave incluso con microdesplazamientos de 0,01 mm.
- Sin émbolo: la estructura coaxialdel pistón y la varilla minimiza la resistencia al deslizamiento.
- Salida de empuje estable: desviación de presión radial < 3 µm, lo que garantiza un empuje constante incluso en configuraciones de varios cilindros.
- Ultrabaja friction and soft contact: controlled output force within ± 0.01 N, with long -term stability.
- High precision linear control: It facilitates a high precision linear movement.
- Double action applications: They can be combined Two low friction cylinders VQPTo improve the precision of thrust, maintaining the same force in the directions of extension and retraction.
How to select a low friction cylinder?
① To control the pressure with fine pressure variations
② To cut glass and lenses, which require constant force
③ Voltage control in response to very low pressures and small pressure variations
④ To transfer precision components, etc., which require a low or uniform speed action
⑤ To eliminate non -satisfied items that require high speed action
⑥ For puncture operations that require high frequency action










*Two low friction cylinders VQP applying pressure can improve the thrust accuracy of a double -effect metal cylinder VQQ and Vqm. In addition, the same force in extension and retraction can be achieved simultaneously.
⑦ For press control of several grinding devices
⑧ For thin films manufacturing engineering
- Voltage control unit for cutting machine and winding machines
- Voltage control for hollow machines
- Voltage control for various thin films manufacturing equipment for liquid crystals
- Voltage control for various industrial equipment for thin films manufacturing


The above is about the principle of operation and the character of the low friction cylinder of the VQ series. It also presents Application examples of low friction cylinders in various industries. If you don't know how to choose a proper low friction cylinder, comuníquese con VPC Pneumatic. We will be happy to attend it!







