| Nominal pressure range | 0,0 to −101.0 kPa | -100,0 a 100,0kPa | -0,1 a 1,0MPa |
| Pressure indication/adjustment | 10,0 a -105,0kPa | -105,0 a 105,0kPa | -0,105 a 1,05MPa |
| Supported pressure | 500kPa | 500kPa | 1,5MPa |
| Minimum unit display/setting | 0,1kPa | 0,1kPa | 0,001 MPa |
| Working medium | Filtered air, Non-corrosive gas / Non-flammable gas |
| Supply voltage | DC12 a 24 V±10%, Ripple (p-p) 10% o menos
(with power supply polarity protection) |
| current consumption | 40 mA or less |
Salida
switching | Standard | Open collector output 1 NPN or PNP, open collector output 2 NPN or PNP |
| Max charging current | 80mA |
| Max voltage applied | 28V (in NPN output) |
| Residual stress | 1V or less (with 80mA charging current) |
| Response time | 2.5 ms or less (with anti-flicker function: 20, 100, 500, 1000, 2000 ms) |
| Short circuit protection | Yeah |
| Repeatability | ±0.2% F.S. ±1 digit |
| Hysteresis | Hysteresis mode | Variable (0 o superior) *¹) |
| Window comparator mode |
| analog output | Voltage output*²） | Output voltage
(Nominal pressure) | 1 a 5V ±2.5% F.S. | 0,6 a 5V ±2,5% F.S. |
| Linearity | ±1%F.S. |
| Output impedance | Aprox. 1 kΩ |
Current output*³） | Output voltage
(Nominal pressure) | 4 a 20mA ±2.5% F.S. | 2,4 a 20mA ±2,5% F.S. |
| Linearity | ±1% F.S. |
| Load impedance | Maximum load impedance: 300Ω (supply voltage 12V)
: 600Ω(Supply voltage 24V) |
| Minimum load impedance: 50Ω |
| Display | 4-digit, 7-segment, 2-color (red/green) LCD |
| Screen Accuracy | ± 2% F.S. ± 1 digit (Ambient temperature of 25 ± 3 ℃) |
| Light indicator | It turns on when the switch output is on on.out1: green, out2: red |
| Around | Box | IP40 |
| Working temperature | Funcionamiento: 0 ~ 50°C, Almacenamiento:-10 ~ 60°C
(No condensation or freezing) |
| Ambient humidity | Funcionamiento/Almacenamiento: 35 ~ 85% HR (Sin condensación) |
| Withstand voltage | AC 1000 V for 1 minute between terminals and case |
| insulation resistance | 50 MΩ or more (500 V DC measured with a megohmmeter)
between terminals and housing |
| Temperature characteristic | ±2% F.S. (reference 25℃) |
| Cable with connector | Oil resistant vinyl cable, 3 conductors Φ3.5, 2m
4 conductors Conductor area: 0.15mm² (AWG26), O.D. of insulator: 1.0mm |
| Norms | CE/RoHS, UL/CSA (E216656) |
