Skip to content Skip to footer

PS Series Inductive Proximity Sensor

Description

■ Features

1. PS series inductive proximity sensor is non-contact detection, fast response, low power consumption, IP67 protection.
2. Inductive proximity sensor supports NPN/PNP output mode with high detection accuracy and long service life, suitable for industrial automation and other multiple scenarios.

■ Specs

ModelPS12
Installation typeArmoredUnshielded
All
output methods
DC typeNPNNONO
NCNC
NO+NCNO+NC
PNPNONO
NCNC
NO+NCNO+NC
2 cablesNONO
NCNC
AC type2 cablesNONO
NCNC
Detection range2mm±10%4mm±10%
Adjustment distance0-1,6mm0-3,6mm
delay distanceDetection range ≤10%
Detection objectMagnetic metal (detection distance decreases when non-magnetic metal)
Response frequencyCC: 1 kHz, CA: 50 Hz
Supply voltageDC type: DC 12-24V (6-36V), boost (p-p) 10% below;
AC type: AC 110-220 V (90-250 V) 50/60 Hz
Withstand voltageAC 1000 V 50/60 Hz 1 min between charging part and case
Influence of tensionWithin the nominal supply voltage range of ±15%,
at the nominal supply voltage value, within the sensing distance of ±10%
Consumption currentN/P type: ≤13 mA, D type: ≤0.8 mA, A type: ≤1.7 mA
control outputType N/P: ≤300 mA, Type D: ≤200 mA, Type A: ≤400 mA
Loop protectionN/P/D type: reverse connection protection, surge absorption,
load short circuit protection, type A: surge absorption
Ambient temperature and humidityOperating Temperature/Storage Temperature:
-30~65℃ (sin congelación ni rocío); humedad de funcionamiento/humedad de almacenamiento: 35~95 % HR
Influencia de la temperaturaRango de temperatura: -30~65℃, a +23℃, ±15 % de distancia de detección;
rango de temperatura: -25~60℃, a +23℃, ±10 % de distancia de detección
Impedancia de aislamiento≥50 MΩ (DC500 megámetros) entre la parte de carga y la carcasa
MaterialCarcasa: latón niquelado, superficie de detección: ABS
Protection classIP67

Subscribe for the updates!

[mc4wp_form id="461" element_id="style-11"]