ELECTRENUMATIC REGULATOR ITV2000

Description

■ Features

ELECTRENEUMATIC REGULATOR ITV2000 provides continuous control of air/vacuum pressure proportional to an electrical signal. Light design and bright and easy to read LED screen.

1. Electric proportional mode, realizing non-polar control of outlet pressure.
2. ITV2030, ITV2050 and other models can perform remote control and program control.
3. Compared with intermittent control, the system is simplified and the components are greatly reduced.
4. Compared with hydraulic proportional valve, small volume, light weight, compact structure, light weight, low cost, but the response speed is much slower than hydraulic system, more sensitive to load changes.
5. Low power consumption: less than 4W (communication way).
6. It is less affected by temperature changes.

■ How to order ITV2000 Electro -Electro -Electro -Regulatory Series

■ Specs

Model		ITV101□	ITV103□	ITV105□
		ITV201□	ITV203□	ITV205□
		ITV301□	ITV303□	ITV305□
Min. pressure feeding		Setting pressure +0.1MPa
Max supply pressure		0,2 MPa	1,0MPa
Adjusted pressure range		0,005 a 0,1MPa	0,005 a 0,5MPa	0,005 a 0,9MPa
Feeding	Strain	24VDC±10%, 12 a 15VDC
Feeding	current consumption	24 VDC type supply voltage: 0.12 A or less 12 to 15 VDC supply voltage: 0.18 A or less
input signal	Current type*¹)	4 to 20 mADC,0 to 20 mADC(Sink type)
	Voltage type	0 a 5 VCC, 0 a 10 VCC
	Preset input	4 points (Common negative), 16 points (No common polarity)
input impedance	Current type	250Ω or less*5)
	Voltage type	Aprox.6.5kΩ
	Preset input	Supply voltage type 24 VDC: Approx. 4.7kΩ Supply voltage type 12 VDC: Approx. 2.0kΩ
Output signal*²) (Monitor output)	analog output	1 to 5 VDC (Output impedance: Approx. 1 kΩ) 4 to 20 mADC (Sink type) (Output impedance: 250 kΩ or less) Output accuracy ±6% F.S. or less
Output signal*²) (Monitor output)	switch output	NPN Open Collector Output: Max. 30V, 80mA PNP Open Collector Output: Max. 80mA
Linearity		±1% F.S. or less
Hysteresis		0.5% F.S. or less
Repeatability		±0.5% F.S. or less
Sensitivity		0.2% F.S. or less
Temperature characteristics		±0.12% F.S./℃ or less
Outlet pressure indication*³)	Precision	±2% F.S.±1 digit or less
Outlet pressure indication*³)	Minimum unit	MPa: 0,001, kgf/cm²: 0,01, bar: 0,01, psi: 0,1*4), kPa: 1
Ambient and fluid temperature		0 at 50℃ (No condensation)
Box		IP65

*1) The 2-wire DC4 at 20mA type is not available. Supply voltage (DC24V or DC12 to 15V) is required.
*2) Select analog output or switching output. Also, when switching output is selected, select NPN or PNP output. When measuring ITV analog output from DC1 to 5V, if the load impedance is less than 100kΩ, the analog output monitor accuracy within ±6% (full span) may not be available. On request, a product with an accuracy of ±6% is supplied. supplied upon request. The outlet pressure is not affected.
*3) Setting numerical values such as zero/span setting or preset input type based on the minimum units for output pressure display.
units for displaying outlet pressure (e.g. 0.001 to 0.500MPa). Please note that the unit cannot be changed.
*4) Minimum unit for 0.9MPa(130psi) types is 1psi.
*5) Value for the state without overcurrent circuit included. Overcurrent circuit included, input impedance varies depending on input current.
Input impedance varies depending on input current. It is 350Ω or less for an input current of DC20mA.
*6) ITV1000 Series Electro -Electroneumatic Regulator is a fat -free specification (parts in contact with fluids).
*7) Above features are limited to static state. When air is consumed on the outlet side, the pressure may fluctuate.

■ Dimensions